Updated guide: https://github.com/bevinkbd/miscellaneous-calla/tree/main/build_guides/EC
| Required | Quantity | Additional notes |
|---|---|---|
| Calla case | 1 | |
| 1.2 mm STS Topre | 1 | <Link to DXF file when ready> |
| 1.6 mm EC Calla PCB | 1 | <Link to Production files when ready> |
| M2 x 0.4 mm Thread, 8 mm Long Pan Screws | 35 | 91200A104 |
| M2.5 x 0.45 mm Thread, 6 mm Long Socket Head Screws | 7 | 91292A010 |
| M3 x 0.5 mm Thread, 8 mm Long Socket Head Screws | 8 | 91292A112 |
| Topre 1U housings | 83 | OEM, Deskeys, or KLC |
| Topre 2U housings | 4 | |
| Domes | 87 | OEM, Deskeys, or KLC |
| Conical springs | 87 | OEM, Deskeys, or KLC |
| 7U Topre Stabilizer | 1 | OEM(?) or Deskeys |
| Scissor/Flush Cutter | 1 | |
| Optional | Quantity | Additional notes |
| Plate/Housing gaskets | x | for reducing rattle/add travel length |
| Silencing rings | x | for silencing upstroke |
| Compression springs | for adding weight to larger keys |
As mentioned at the start of the page, there will be permanent modifications done to 6 Topre housings. The purpose of these cuts is to provide clearance for the gummy O-ring mounting tab used in MX builds.



